2. Parameter File Interface: Enables you to specify command-line parameters in a parameter file. The only exception is the PARFILE parameter because parameter files cannot be nested. The use of parameter files is recommended if you are using parameters whose values require quotation marks. See Use of Quotation Marks On the Data Pump Command Line.
3. Interactive-Command Interface: Stops logging to the terminal and displays the Export prompt, from which you can enter various commands, some of which are specific to interactive-command mode. This mode is enabled by pressing Ctrl+C during an export operation started with the command-line interface or the parameter file interface. Interactive-command mode is also enabled when you attach to an executing or stopped job. For a complete description of the commands available in interactive-command
ADD_FILE - Add additional dump files.
CONTINUE_CLIENT - Exit interactive mode and enter logging mode.
EXIT_CLIENT - Stop the export client session, but leave the job running.
FILESIZE - Redefine the default size to be used for any subsequent dump files.
HELP - Display a summary of available commands.
KILL_JOB - Detach all currently attached client sessions and kill the current job.
PARALLEL - Increase or decrease the number of active worker processes for the current job. This command is valid only in the Enterprise Edition of Oracle Database 10g.
START_JOB - Restart a stopped job to which you are attached.
STATUS - Display detailed status for the current job and/or set statusinterval.
STOP_JOB - Stop the current job for later restart.
Data Pump Import Modes
Full Import Mode
A full import is specified using the FULL parameter. In full import mode, the entire content of the source (dump file set or another database) is loaded into the target database. This is the default for file-based imports. You must have the IMP_FULL_DATABASE role if the source is another database.
Cross-schema references are not imported for non-privileged users. Example:
impdp system/password DIRECTORY=dpump_dir DUMPFILE=expfull.dmp FULL=Y
Schema Mode
A schema import is specified using the SCHEMAS parameter. In a schema import, only objects owned by the specified schemas are loaded. The source can be a full, table,tablespace, or schema-mode export dump file set or another database. If you have the IMP_FULL_DATABASE role, then a list of schemas can be specified and the schemas themselves (including system privilege grants) are created in the database in addition to the objects contained within those schemas. Cross-schema references are not imported for non-privileged users unless the other schema is remapped to the current schema. Example
impdp hr/hr SCHEMAS=hr DIRECTORY=dump_dir
DUMPFILE=hr-20080107.dmp
impdp hr/hr DIRECTORY=dump_dir SCHEMAS=hr
ESTIMATE_ONLY = Y EXCLUDE=TABLE:"like 'EMP":"EMP_2005'"
impdp system/pssword SCHEMAS=hr DIRECTORY=dump_dir
DUMPFILE=hr20080120.dmp REMAP_SCHEMA=hr:test
impdp hr/hr DIRECTORY=dump_dir SCHEMAS=hr INCLUDE=TABLE:"like'EMP_%'" DUMPFILE=nr_emp_tables.dmp TABLE_EXISTS_ACTION=REPLACE
Table Mode
A table-mode import is specified using the TABLES parameter. In table mode, only the specified set of tables, partitions, and their dependent objects are loaded. The source can be a full, schema, tablespace, or table-mode export dump file set or another database. You must have the IMP_FULL_DATABASE role to specify tables that are not in your own schema.
impdp hr/hr TABLES=emp DIRECTORY=dump_dir CONTENT=DATA_ONLY DUMPFILE=emp-20080106.dmp
impdp hr/hr TABLES=login DIRECTORY=dump_dir DUMPFILE=hr_login_table.dmp TABLE_EXISTS_ACTION=REPLACE
Tablespace Mode
A tablespace-mode import is specified using the TABLESPACES parameter. In tablespace mode, all objects contained within the specified set of tablespaces are loaded, along with the dependent objects. The source can be a full, schema, tablespace, or table-mode export dump file set or another database. For unprivileged users, objects not remapped to the current schema will not be processed.
impdp system/password DIRECTORY=dpump_dir DUMPFILE=tbs.dmp
TABLESPACES=tbs_4, tbs_5, tbs_6
Transportable Tablespace Mode
A transportable tablespace import is specified using the TRANSPORT_TABLESPACES parameter. In transportable tablespace mode, the metadata from a transportable tablespace export dump file set or from another database is loaded. The datafiles specified by the TRANSPORT_DATAFILES parameter must be made available from the
source system for use in the target database, typically by copying them over to the target system.
impdp system/password DIRECTORY=dpump_dir DUMPFILE=tts.dmp
TRANSPORT_TABLESPACES=tbs_1 TRANSPORT_FULL_CHECK=Y LOGFILE=tts.log
Wednesday, July 16, 2008
Data pump Import (impdp) patt #1
Data Pump Import is a utility for loading an export dump file set into a target system. The dump file set is made up of one or more disk files that contain table data, database object metadata, and control information. The files are written in a proprietary, binary format. During an import operation, the Data Pump Import utility uses these files to locate each database object in the dump file set.
Import can also be used to load a target database directly from a source database with no intervening dump files. This allows export and import operations to run concurrently, minimizing total elapsed time. This is known as a network import.
Data Pump Import enables you to specify whether a job should move a subset of the data and metadata from the dump file set or the source database (in the case of a network import), as determined by the import mode. This is done using data filters and metadata filters, which are implemented through Import commands
Invoking Data Pump Import
The Data Pump Import utility is invoked using the impdp command. The
characteristics of the import operation are determined by the import parameters you specify. These parameters can be specified either on the command line or in a parameter file.
Data Pump Import Interfaces
You can interact with Data Pump Import by using a command line, a parameter file, or an interactive-command mode.
1.Command-Line Interface: Enables you to specify the Import parameters directly on the command line. For a complete description of the parameters available in the command-line interface, see Parameters Available in Import's Command-Line Mode
Please go part#2
Import can also be used to load a target database directly from a source database with no intervening dump files. This allows export and import operations to run concurrently, minimizing total elapsed time. This is known as a network import.
Data Pump Import enables you to specify whether a job should move a subset of the data and metadata from the dump file set or the source database (in the case of a network import), as determined by the import mode. This is done using data filters and metadata filters, which are implemented through Import commands
Invoking Data Pump Import
The Data Pump Import utility is invoked using the impdp command. The
characteristics of the import operation are determined by the import parameters you specify. These parameters can be specified either on the command line or in a parameter file.
Data Pump Import Interfaces
You can interact with Data Pump Import by using a command line, a parameter file, or an interactive-command mode.
1.Command-Line Interface: Enables you to specify the Import parameters directly on the command line. For a complete description of the parameters available in the command-line interface, see Parameters Available in Import's Command-Line Mode
| Parameter | Description | Default |
| attach | connects a client session to a current running data pump import job | |
| content | filters what is import: data_only, metadata_only , all | all |
| directory | destination of log and dump files | data_pump_dir |
| dumpfile | name of the dump file | |
| estimate | method used to estimate dump file size : blocks or statistics | |
| estimate_only | Y/N. instruct data_pump whether data should be imported or estimated. | N |
| exclude | exclude objects and data from being imported. | |
| flashback_scn | scn of the database to flash back to to during imported | |
| full | Y/N. import all data and metadata in a full mode import | N |
| help | Y/N. display a list of avillable commands and options | N |
| include | specify which objects and data will be exported | |
| job_name | name of the job | system generated |
| logfile | name of log file | expdp.log |
| network_link | source database link for a data pump job importing a remote database | |
| nologfile | a Y/N flag used to suppress log file creation | |
| parallel | set number of workers for the export job | 1 |
| parfile | name the parameter file to use | |
| query | filters row from table during the import | |
| schemas | name the schema to be exported for schema mode import | |
| remap_datafiles | change the name fo source datafiles | |
| remap tablespace | change the name fo source tablespace | |
| remap_schema | import data into a new schema | |
| skip_unusable_indexes | a N/Y flag | |
| sql file | name of file in which DDL of the import will be write | |
| table_exists_action | instruct import how to proceed if the table being imported is exist. Values include skip,append,truncate and replace | skip |
| status | displays detailed status of the data pump job | |
| tables | list of tables and partitions to be exported for table mode import | |
| tablespace | list of tablespaces to import in tablespace mode | |
| transport_full_check | Specifies whether the tablespaces being imported should be verified as a self-contained set. | |
| transport_tablespaces | specifies a transportable tablespace mode import | |
| transport_datafiles | list of datafiles to be imported during a transportable tablespace mode import | |
| version | specifies the version of the database. |
Please go part#2
Topic :
Export-Import
Subscribe to:
Posts (Atom)